Updated on October.  2011

COMPLETE NEEDLE PUNCHING LINES

NEEDLE PUNCHING LINES:

OFFERS:

1 used nonwoven line,consisting of:

producer: Befama/Poland, y.o.c. 1980, width: 2000 mm

hopper feeder - separate drive, feed chute – own construction

drawing in carding machine - separate drive, metal detector with + reverse gear

carding machine: 1 tambour, 5x working rolls and  cylinder clearer, 1 volant + 1 doffer

carding machine on the strap + sweeping machine

crosslapper - Befama, y.o.c.1980, working width input 2000 mm - exit 2600 mm

separate drive -E- continuously regulable, casual width elektr. regulable

1 main control cabinet

1 control console, electronic regulable, separate drive or automaticity possible (new)

needling machine - DOA-Linz Type 1140

longitudinal and cross(transverse ) cutter

winder - Asselin

productivity ca. 90 - 120 kg/h

location: Europe (West)

1 - Complete Non-Woven Line Producing Mats/Felts from Cotton, Synthetic (PES), Animal Hair as well

As Sisal, or Cocos; max. 2.4 m Width, Consisting Of:

 
1   Dilo Bale Opener, Year 1977, Width 1.2 m, with 4 Beating Units

1   Dilo Cyclone, Year 1977

1   Dilo Chute Feeder, Year 1977, Width 1.8 m

1   Dilo/Lieb Willow/Tearing Unit, Year 1977, Width 1.2 m

1   Hering Fan, Year 1977

1   DOA Chute Feeder, Year 1985

1   DOA Opener, Year 1985, Width 1.2 m

1   Hering Fan, Year 1985

1   DOA Chute Feeder, Year 1985

1   Laroche Willow/Tearing Unit, Year 1983, ww 1.0m, Single Tambour

1   Hering Fan, Year 1983

1   Lieb Anti-Static Spraying Unit, Year 1983

1   Magnet

2   Dilo 2-Time Untwisters, Year 1977

1   Hering Fan, Year 1977

1   Dilo Lapper, VLA Year 1977, Width 2.4 m, speed 6.5m/min

1   Unwinding Unit for Backing Tissue, Year 1977

1   Dilo Needle Loom, Year 1977, Width 2.5 m

1   DOA/Neretter Lapper, Year 1985, Width 2.65 m, with Weighing Station, speed 8.0m/min

1   DOA Fine Lapper, Year 1988, Width 2.65 m

1   DOA Needle Loom, Year 1985, Width 2.65 m

1   Unwinding Unit for Backing Tissue, Year 1985

1   DOA Transport Belt, Year 1985

1   Mohr Dryer, Year 1982, Width 2.9 m, with 2 Spraying Station (for Latex),

with Pre-Calandering Unit and Laminating Delivery Unit

1   Goller Calander, Year 1983, Width 2.8 m

1   DOA Longidual Cutting Unit, Year 1985, 6 Knives, with Guillutine

1   Lieb Cutting Unit, Year 1985, Width 2.55m, with Feed-In unit, Longidual Cutting and Delivery Belt

1   Wind-Up Unit, Year 1990

3   Geka Thermo-Oil Heating Units,

(1) Year 1989  (1) Year 1980  (1) Year 1978

1   Crecon Fire Extinguishing Unit

REF IRD/N/3/10/11. BKT-651-101215.

Product from 250 gr/sqm up to 1700 gr/sqm

Production capacity based on weight is between 350-500 Kg/Hrs

 
Including Piping and various Fans for Suction Units

Including New Spare Parts like Needle Boards, Tambours, etc

Consumption: Complete Line total 430 kW, Oil Heating units only 112 kW

Location: Europe

Condition: Excellent

Available: Immediately,

  Other details, price and pictures available on demand..

  REF IRD/N/3/10/11. BKT-651-101215.

OTHER OFFERS:

 REF. VID./11/3./09 

1 – NEEDLE PUNCHING LINE CONSISTING OF THE FOLLOWING:

1- COMPLETE NEEDLING PUNCHING LINE, YOC 1988-1999

COMPOSED OF: 

BALE-OPENER BY "BRU" - FRANCE MOD. OB-150

YOC 1992, WORKING WIDTH: 1400 MM, FEEDING TABLE, 5 MTS LONG, MADE WITH STEEL SLATS, BALE-OPENING DEVICE, EXIT MOTORFAN

VERTICAL FINE OPENER BY "LAROCHE" - FRANCE

YOC 1999, WORKING WIDTH: 1500 MM 

VOLUMETRIC HOPPER FEEDER BY "THIBEAU" - FRANCE

YOC 1987, WITH VERTICAL SILO FEEDER AND ROTARY CONDENSER, WEIGHT FIBRES DISTRIBUTION CONTROL

 DOUBLE DOFFER CARDING MACHINE BY "THIBEAU" - FRANCE MOD. BP 125 PP

YOC 1987, WORKING WIDTH: 2500 MM, INLET UNIT, LICKER-IN, BREAST UNIT WITH 2 PAIRS W/S, TRANSPORT ROLLER, MAIN SWIFT WITH 4 PAIRS W/S, 2 DOFFERS WITH ROTARY COMBS, ALL RIGID METALLIC WIRES IN PERFECT CONDITIONS

CROSS-LAPPER BY "ASSELIN" - FRANCE MOD. 380

YOC 1987, INLET WORKING WIDTH: 2500 MM (INLET APRON WIDTH: 2900 MM), OUTLET WORKING WIDTH: 2800 MM (OUTLET APRON WIDTH: 3000 MM), WEB CONVEYING CARBON APRONS, DELIVERY APRON WITH HASTEM PLASTIC SLATS, SPEED 80 MTS/MIN

ROTARY CYLINDRICAL PRE-NEEDLE LOOM BY "ASSELIN" - FRANCE MOD. 169

YOC 1987, WORKING WIDTH: 2800 MM

FINISH NEEDLE LOOM BY "FEHRER" - AUSTRIA MOD. NL 2000

YOC 1988, WORKING WIDTH: 3000 MM ,SINGLE DOWN-STROKE NEEDLE BOARD WITH 5000 NEEDLES/LIN MT, STROKE 40 MM, SPEED 1500 RPM

ROLL WINDING DEVICE

EDGE-TRIMMING OPENER BY "LAROCHE" - FRANCE MOD. SUPERTRIM

YOC 1988, WORKING WIDTH: 500 MM , EXIT MOTORFAN

 COMPUTERIZED CENTRAL LINE CONTROL 

ALL ELECTRIC MOTORS AND CONTROL PANELS 220 V - 50 HZ - 3-PHASES

ALL DUCTWORK (PIPING) FOR FIBRE CONVEYoRS

 REF. ARP/W.P./11/5/09

1 - NEEDLE PUNCHING LINE:

1. 1 Spinnbau double doffer card, y.o.c. 2003, Type SSC4-5 CP, consisting of:

1.1. One Temafa material bin in 2500 mm ww, 1000 mm depth and a complete height of 3000

mm, with top and bottom window at both sides, filling level controlled by in height adjustable

infrared devices. One door at the backside for cleaning, locked by security switches. 2

delivery rollers, one preopening roller.

1.2. One Spinnbau feeder with volumetric chute in 2500 mm ww, consisting of:

One large woolbox with feeding apron, one upright needle lattice, one backstripping-, one

doffing roller dia 450 mm, one volumetric chute, fibrelevel controlled by ultrasonic device,

chute adjustable in depth from 80 to 240 mm, one drawing off roller, one feeding table

with Transilon belt.

1.3. 1 Spinnbau card, year of construction 2003, in 2500 mm working width,

card, following equipped:

Overhead Feeding device:

1 feed roller dia 412 mm

1 cleaning roller dia 118 mm

1 licker-in dia 412 mm

1 breast dia 850 mm

4/4 workers/strippers dia 213/118 mm

1 intermediate roller dia 550 mm

Card:

1 main cylinder dia 1500 mm

5/5 workers/strippers dia 213/118 mm

1 doffer top dia 550 mm

1 doffer bottom dia 550 mm

1 pair condensing rollers top dia 292 mm

Top drawing off device:

1 drawing off roller/wired dia 160mm

Bottom drawing off device:

1 drawing off roller/wired dia 160 mm

Drawing off tables:

1 drawing off table top

1 drawing off table bottom

Covers:

page 2

Offerno.: 111-09 15.10.09

The card has covers to clap up and down by linear motors(secured when clapped up), the sides are fully

covered and electronically locked .

Rigid wire (metallic clothing):

One complete set of rigid wire, mounted, for fibres 1,7 dtex – 17 dtex, capacity up to 1000 KG/h

Electric:

Voltage: ~400 V AC, 3 Phases

Control voltage: ~220 V AC, =24V DC

Frequency: 50 Hz

Electrical servo-drives:

Feed roll : ACS, 1,42 KW

Breast : ACS, 15,0 KW

Workers, breast: ACS, 2,20 KW

Main cylinder : ACS, 30,0 KW

Workers, main cylinder: ACS, 2,20 KW

Strippers: mechAnically from main swift

Doffer top : ACS, 2,20 KW

Doffer bottom: ACS, 2,20 KW

Condensing rollers top: ACS, 2,20 KW

Take-off rollers top: ACS, 1,42 KW

Take-off rollers bottom: ACS, 1,42 KW

Web conveying apron top ACS, 2,20 KW

Web conveying apron bottom : ACS, 2,20 KW

Switchboards and controls:

-switchboards Rittal Series, complete wired.

-switchboards without cooling devices.

-control cabinet, touchsreen

2. One Autefa crosslapper, Type CL 4000 with profiling, in 2500 mm ww, 4500 mm lay-down

width

3. Needling:

3.1. One Fehrer Pre-needle loom, y.o.c. 1991, Type NL 9, 1 needle board, 4000 mm ww,

needling from top, 3200 needles/mtr., stroke 60 mm, with finger feeding device, 1200

1/min

3.2. One Fehrer needle loom, y.o.c. 1996, Type NL 21, 2 needle boards, 3700 mm ww,

needling from bottom, 2x5000 needles/mtr., stroke 60 mm,1500 1/min

1/min

3.3. One Fehrer needle loom, y.o.c. 1991, Type NL 21, 2 needle boards, 3700 mm ww,

needling from top, 2x5000 needles/mtr., stroke 60 mm, 1200 1/min

3.4. One winding and slitting device.

Price – on demand.

Delivery time: immediately

Payment terms: 100 % before beginning of dismantling

REF.YKS/N/11/5/09

OFFERS:

1 QUILTING PLANT, for quilts, anoraks, including:
1 DIRECT FEEDING SYSTEM for quilting machines, with opener, constr. "MASIAS", type 4C/3000-T and 2C/1B-V, year 1995, ww. 3000 mm.
1 QUILTING MACHINE, constr. "SOTEXI", type L.2000, year 1995, ww. 3000 mm, multi-needles.
1 AUTOM. EDGE MACHINE, 4 sides, constr. "KINNA", year 1995.
1 AUTOM. CUTTLER, constr. "KINNA", year 1995.

1 NON WOVEN LINE, ww. 2500 mm, including:

1 SHAKER (beating-cleaning machine), constr. "HOUGET DUESBERG BOSSON", year 1986, ww. 1400 mm, fan, filters.

1 FINE OPENER, constr. "HERGETH", ww. 1000 mm, suction, fan.

1 CARD, constr. "SPINNBAU", ww. 2500 mm, feeding silo, volumetric hopper feeder with Servolap DC, breast Ø 1250 mm, 5 work/strip, Swift Ø 1500 mm, 4 work/strip, doffer Ø 1250 mm, electric board, steel wire card clothing.

1 CROSS LAPPER, constr. "AUTOMATEX", type FA.2000.T, year 1995, feeding 2500 mm, delivery 3000 mm, speed 70 m/min, electric board.

1 NEEDLE LOOM, constr. "VERBRUGGEN", ww. 2500 mm, traverse 60 mm, 2900 needles/m, speed max. 600 t/min, CBF feeding, electrical board.

1 WINDING MACHINE, ww. 2600 mm, with longitudinal cutting discs.

1 NON WOVEN LINE, ww. 2500 mm, including:

1 CARD, contr. "SPINNBAU", ww. 2250 mm, mechanical weighting hopper feeder, breast Ø 1000 mm, 4 work/strip, swift Ø 1400 mm, 4 work/strip, doffer Ø 1250 mm, flexible card clothing.

1 CAMEL BACK, contr. "SPINNBAU", feeding 2250 mm, delivery 2500 mm.

1 NEEDLE LOOM, contr. "DILO", type NFZ.25, ww. 2500 mm.

1 WINDING MACHINE, contr. "DILO", type WW.25, ww. 2500 mm.

1 NON WOVEN THERMOBONDING LINE FOR FELT, including:

2 BALES OPENER, constr. "DELL ORCO", ww. 1000 mm, feeding table length 2500 mm.

1 HELICAL BEATER, constr. "DELL ORCO", type BM, ww. 2500 mm, spiral sticks, filters, capacity 1000 Kg/h.

1 BLENDING CHAMBER, fix bin emptier, constr. "DELL ORCO", for storage of blended fibers.

1 OPENER, constr. "DELL ORCO", type AL.95, ww. 1000 mm.

1 DOUBLE DOFFER CARD, constr. "BEMATIC", type BSS-BHL, year 1998, ww. 2500 mm, with hopper feeder, capacity 800 Kg/h.

1 CROSS LAPPER, constr. "AUTOMATEX", type FA.2000/T, year 2006, with introducing group type EN-81/E for pre needle loom.

1 PRE NEEDLE LOOM, constr. "AUTOMATEX", type PR.30, year 2006, width 2800 mm, single board, down stroke, from top to down, 3000 needles per linear meter, 1200 rpm, taverse 60 mm, suction.

1 THERMOBONDING OVEN, constr. "SICAM", year 1998, 3 thermobonding chambers, 1 cooling calender, natural gas heating.

1 BATCH WINDER, constr. "AUTOMATEX", type RO.92, year 1998.

1 TRANSVERSAL AND LONGITUDINAL CUTTING MACHINE, constr. "AUTOMATEX", type TL.72/TT.82.B.

New electrical panel year 2006.

1 QUILTING LINE, width 2700 mm, year 2004, including:

1 HOPPER FEEDER, constr. "MASIAS", type CR.150, 1 FINE OPENER type AD.160.TP, fan, direct feeding system SAD.TA.30, power 35,59 Kw, ww. 2700 mm, for Pes fleece 150-1000 gr/m².

1 QUILTING MACHINE, constr. "STUTZNÄCKER MAMMUT", type VMK/D-250/3NR-CNC, year 2004, ww. 2700 mm, stitching width max. 2700 mm, distance between outer needles 2375 mm, min. distance between two needles 25 mm, max. lateral displacement. 360 mm, 3 needle bars, spacing with 3 needle bars 75/150 mm, needling speed 1400 points/min, possibility tack and jump.

1 MATTRESS PANEL SEWING UNIT, constr. "NÄHTEC", type KL.222, year 2004, compensator storage, storable width 2400 mm, storable length 5000 mm, side seam sewing unit, electromotive adjustment device, cross sewing unit, reserve cross cutting unit, delivery belt, electr. Adjustment device for material width measuring, quilting contours recognition device, sewing unit control system, stacker, power 5 Kw.

1 NON WOVEN LINE, ww. 2800 mm, including:

4 WEIGHTING BALES OPENERS, constr. "LAROCHE", type GA, year 1972, ww. 1000 mm, feeding table length. 2 m, electronic weighting.

1 COLLECTING BAND, ww. 1000 m, with opener LAROCHE, type G1, year 1972

1 DOUBLE DOFFER CARD, constr. 'FOR", year 1985-90, ww. 2500 mm, hopper feeder with condenser, 2 swifts, doffers.

1 CROSS LAPPER, constr. "ASSELIN", type 340-2500, year 1985, feeding band 2800 mm, delivery lattice 3000 mm.

1 PRE-NEEDLE LOOM, constr. "ASSELIN", type 169, year 1984, ww. 2800 mm.

1 NEEDLE LOOM, constr. "ASSELIN", type SD 26, year 1988, ww. 2800 mm, single stroke, downstroke, from top to down, 1 needles board.

1 NEEDLE LOOM, constr. "ASSELIN", type DF26-4F, year 1984, ww. 2800 mm, double stroke: from top to down and from down to top, 4 needles boards (2x2), 2 flat magnet for needles.

1 ACCUMULATOR, 3 rollers, high 2 m.

1 BATCH WINDER, constr. "PUTZ", longitudinal and transversal cutter.

1 NON WOVEN LINE, ww. 2500 mm, including:

5 WEIGHTING BALES OPENERS, constr. "HOUGET DUESBERG BOSSON", year 1986, ww. 1000 mm, feeding table length. 2,5 m, electron. weighting.

1 COLLECTING BAND, ww. 1000 m, with opener LAROCHE, year 1998, fan.

1 CONDENSER, constr. "LAROCHE", year 2004, for feeding card silo, with dust suction 2x6 socks.

1 DOUBLE DOFFER CARD, constr. "THIBEAU", type CA6 B 125 PP, year 1989, ww. 3000 mm, hopper feeder with silo 1991, Servolap DC, breast 2 work//strip,1 swift 4 work/strip, double doffers.

1 CROSS LAPPER, constr. "ASSELIN", type 340, entry 2800 mm, delivery 3000 mm

1 PRE-NEEDLE LOOM with cylinders, constr. "ASSELIN", type 169, year 1988, cylinders Ø 400 mm, ww. 2800 mm.

1 NEEDLE LOOM, constr. "ASSELIN", ww. 2800 mm, downstroke, from top to down, 1 needles board.

1 NEEDLE LOOM, constr. "ASSELIN", ww. 2800 mm, downstroke, from top to down.

1 TRANSPORT LATTICE, batch winder.

1 NEEDLE LOOM, constr. "ASSELIN", ww. 2800 mm, downstroke, from top to down.

1 ACCUMULATOR, constr. "PUTZ", 2 rows, ww. 2500 mm

1 LONGITUDINAL CUTTER, constr. "PUTZ", ww. 2500 mm, with batch winder.

1 EDGE TRIM OPENER, constr. "LAROCHE", type Supertrim, year 2002.

1 MOVING CUTTER, constr. "MOHR", year 1990, ww. 3800 mm.

1 NON WOVEN PLANT, constr. "GARNETT", including:

1 CARD, constr. "GARNETT", ww. 1980 mm, hopper feeder, 1 swift, doffer.

1 CROSS LAPPER, entry 2000 mm, delivery 2800 mm.

1 NEEDLE LOOM, constr. "unknown", ww. 2500 mm, single needle board, downstroke, from top to down.

1 BATCH WINDER, ww. 2500 mm.

1 EDGE TRIM OPENER, constr. "LAROCHE".

2 ROUND BINS,capacity 1500 Kg.

1 NON WOVEN LINE, including:

2 CARDS, constr. "HOUGET DUESBERG BOSSON", ww. 1800 mm, hopper feeder, breast apparatus, 1 swift, 1 doffer.

1 CROSS LAPPER, constr. "BEFAMA", entry 2000 mm, delivery 2600 mm.

1 PRE NEEDLE LOOM with cylinders, constr. "ASSELIN", type 169, cylinders Ø 400 mm, ww. 2800 mm.

1 WINDER, ww. 2800 mm, longitudinal cutter.

REF. RUB.11/4./09

ADDITIONAL INFORMATION CAN BE PROVIDED ON DEMAND.